Akai MPC5000 Especificações descarregar pdf (Página 115)

Chapter 12: Sample Editing: TRIM Mode

Setting the Start / End Points

The start/end points set the part of the sample data which will be played.

The recorded sample may - for example - have silence at the beginning,

which may make it more difficult to place the sound in the correct spot

when hitting the pad. You can fix this by adjusting the start point. You

can also adjust both the start and end points to play only a part of the

phrase. If the sample has extra silence or unwanted sound at the end,

you can delete the empty parts by adjusting the end point and using the

edit feature. This is a good way to free up additional memory.

Start/end points are displayed in sample points. The sample point is the

minimum unit used for sample editing. The MPC5000 has 44,100 sample

points per second.

 About the waveform display

The TRIM page displays the waveform of the sample selected in the

'Sample' field. It displays the waveform of the whole sample, with the

parts set by start/end points highlighted.

 LEFT / RIGHT / BOTH Waveform View

If you select a stereo sample, you can select the channel (LEFT/RIGHT or

BOTH) to display in the 'View' field.

 Adjusting the start point

01. Press [MODE] and [PAD 5] (TRIM).

When you press the [MODE] button, its LED will blink. Pressing [PAD 5] while the [MODE] button’s LED is blinking will display the TRIM page.

02. Select the 'Sample' field and select a sample you wish to edit.

The 'Sample' field is located in the upper left corner of the screen, which displays the sample name. This field chooses which sample's waveform

is to be displayed.

03. Select the 'St' (start) field and adjust the start point.

You can change the start point value by turning the [DATA] wheel. If you press the left or right [CURSOR] buttons while holding [SHIFT], you can

move the cursor to higher points within the numeric display to allow for quicker value selection. You can also enter the value directly with the

numeric keypad.

Additionally, the start point can be edited by moving the [Q1] Q-LINK slider.

04. Hit the pad to check the start point.

When you hit the pad, the MPC5000 plays the sample. The playback method varies depending on the pad.

[PAD 13] (PLAY LOOP)

The MPC5000 will play the sample from the loop point to the end point repeatedly.

[PAD 14] (PLAY TO)

The MPC5000 will play the part before the loop point. If the cursor is on the TRIM END parameter, it will play from the sample start to

the TRIM END. If the cursor is on the LOOP START parameter, it will play from the sample start to the LOOP START. Any other

case, it will play from the sample start to the TRIM START.

[PAD 15] (PLAY FROM)

The MPC5000 will play the sample from the loop point. If the cursor is on the TRIM END parameter, it will play from the TRIM END to

the sample end. If the cursor is on the LOOP START parameter, it will play from the LOOP START to the sample end. Any other

case, it will play from the TRIM START to the sample end.

[PAD 16] (PLAY ALL)

The MPC5000 will play the whole sample.

[PAD 1] to [PAD 12]

The MPC5000 will first play from the start point to the end point, and then play from the loop point to the end point repeatedly.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 221 222

Comentários a estes Manuais

Sem comentários

Akai MPC5000 Especificações Página 115

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos Musicais Akai MPC5000