Akai S950 Manual do Utilizador

produced by: glitchscience.com 2011© 2014© 1 AKAI S950 Replacement Display Install Guide glitchscience.com

produced by: glitchscience.com 2011© 2014© 10 Fig. 8 - Unscrew the LCD inverter Remove the Original LCD: The original LCD backlight h

produced by: glitchscience.com 2011© 2014© 11 Fig. 9 - Pull LCD through the hole pointed to Fig. 10 - Pull

produced by: glitchscience.com 2011© 2014© 12 Fig. 11 - Pull LCD through the hole Fig. 12 - Original LCD and

produced by: glitchscience.com 2011© 2014© 13 Fig. 13 - These pins need to be covered Fig. 14 - Pins covere

produced by: glitchscience.com 2011© 2014© 14 Fig. 15 - LCD must be placed behind mounting frame Fig. 16 -Screw top 2

produced by: glitchscience.com 2011© 2014© 15 Fig. 17 - Top screw screwed in from the back Fig. 18 - Top screw sc

produced by: glitchscience.com 2011© 2014© 16 Fig. 19 - Plug in the power cable Fig. 20 - Replacement L

produced by: glitchscience.com 2011© 2014© 17 Install the Replacement LCD: Once the original LCD is completely removed, the replacement

produced by: glitchscience.com 2011© 2014© 18 Fig. 21 - Testing the LCD Test the LCD: Now that the replacement LCD is mounted and plu

produced by: glitchscience.com 2011© 2014© 19 This guide is not to be distributed or redistributed without explicit permission from t

produced by: glitchscience.com 2011© 2014© 2 Table of Contents_________________ Required Tools...

produced by: glitchscience.com 2011© 2014© 3 Fig. 1 - Phillips Head Screwdriver Required Tools:  Phillips Head Screwdriver

produced by: glitchscience.com 2011© 2014© 4 Fig. 2 - Screw locations on the sides of the case Opening the case: Remove the screws fr

produced by: glitchscience.com 2011© 2014© 5 Fig. 3 - Screw location on the back of the case Opening the case: Remove the screw from t

produced by: glitchscience.com 2011© 2014© 6 Fig. 4 - Screw locations on the bottom of the case Opening the case: Remove the screws f

produced by: glitchscience.com 2011© 2014© 7 Fig. 5 - Screw locations on the top inside of the case Opening the case: Remove the top

produced by: glitchscience.com 2011© 2014© 8 Fig. 6 - These knobs need removed Opening the case: The front face of the case needs to

produced by: glitchscience.com 2011© 2014© 9 Fig. 7 - Remove the original LCD Remove the Original LCD: The original LCD is held in pl